Manually find your wireless network's security settings (password)
7. Make a note of the Security type (Authentication), Encryption type and Network security key listed. Windows 7 Users. 1. Click → Control Panel → Network and Internet → Network and Sharing Center. 2. Click Manage wireless networks. 3. Double-click on your wireless network in the list to open the properties. 4. Click on the Security tab. 5.
Wireless setup - Using the control panel - Brother USA
T4. If you're still unable to connect after verifying your wireless security settings, contact your router manufacturer for help with your network. We recommend you check these settings: - Verify the wireless security settings on the router's configuration menu match what you've been using.
Wireless setup - Using the control panel - Brother USA
If the display is blank after entering your network key and pressing OK then you have entered the wrong network key. Verify your network's security settings and try again. 7. Press (Yes) to apply your settings. 8. Your machine will try to connect to your wireless network and print a report.
Connect your machine to a wireless network - Brother USA
The key or password must exactly match the spelling and case settings on your router. If you immediately receive a message stating "Wrong Password", then you have entered the wrong Authentication Method, Encryption Type or network key. Verify your network's security settings and try again. i.
Connect to an infrastructure wireless network - Brother USA
j. Your wireless network settings are displayed, click Next. k. A wireless LAN report prints. l. Choose the Connection status printed on the report and click Next. - Connection: OK, go to step m. - Connection: Failed, t he wireless security settings you entered are incorrect. Contact your access point manufacturer or internet service provider ...
Connect your machine to a wireless network - Windows, …
SSID (Network Name) - The name of your wireless network Network Key (Password) - The security password to connect to your wireless network. If you're not sure about any of these settings, contact your router manufacturer or network admin. b. Press Menu. c. Press or to select Network and then press OK. d.
Connect your machine to a wireless network - Brother USA
- Verify the wireless security settings for your network and try again. The information printed on the outside of the router may no longer be correct. If you're not sure about any of these settings, we may be able to help you find them. Click here for assistance. - Make sure that your router is not configured to use WPA2-PSK with TKIP.
Connect your machine to a wireless network - Macintosh - Brother …
b. Gather your network's security settings. Place a check next to Checked and confirmed, and then click Next. c. When prompted, temporarily connect the USB cable (not included) directly from the computer to your Brother machine. Make sure the Brother machine is turned on. This step may take a few minutes for the USB driver to be installed.
Connect your machine to a wireless network - Windows - Brother …
Enter the network Name (SSID), which is case sensitive, click Next. Select the authentication and encryption. Enter the network key if necessary and click Next. f. Enter the Network Key and then click Next. g. On the Wireless Network Settings Confirmation screen, click Next. The settings will be sent to the machine.
Wireless Setup - Using Web Management - Brother USA
If you're still unable to connect after verifying your wireless security settings, contact your router manufacturer for help with your network. We recommend you check these settings:- Verify the wireless security settings on the router's configuration menu match what you've been using. The information printed on the outside of the router may ...